 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Feed-through Non-reflecting Terminations MR Series sFeatures 1.High Performance These wide bandwidth/high matching non-reflective terminators use Hirose Electric original high frequency matching technology. 2.Feed-through Termination These termination are intended for measurements of 50o products using a synchroscope. MR-201 sProduct Specifications Ratings Frequency range Characteristic impedance Maximum Input Power Resistance value DC to 0.5 GHz 50 ohms 0.5 W 501 ohms Standard 1.1 max. 1.2 max. No electrical discontinuity of 1 s or more No damage, cracks, or parts dislocation Operating temperature range Operating relative humidity -10c to +65c 95% Max. Item 1.V.S.W.R. (Reference) 2.Vibration 3.Shock 4.Temperature cycle No damage, cracks, or parts dislocation Conditions DC to 100 MHz 100 MHz to 500 MHz Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm, acceleration of 98 m/s2 for 2 hours in each of 3 directions Acceleration of 490 m/s2, sine half-wave waveform, 3 cycles in each of the 3 axis Temperature: -55c +5c to +35c +85c +5c to +35c Time: 30 15 max. 30 15 max. (Minutes) 200 cycles qThe test method conforms to MIL-STD-202. sMaterials Part Connector Body Insulator Male contacts Female contacts Resistor Material Brass PTFE Brass Beryllium copper Metal film Finish Nickel plating ---------- sExternal Dimensions Gold plating Gold plating ---------- sTypical Data (With output end open) 68 |
Price & Availability of MR-201
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |